Solid Brass Cup Or Bin Pulls – Vintage and Modern Styles

Solid brass cup or bin pulls are a great way to update older hardware on your cabinets or furniture. Using a cup or bin pulls in place of traditional cabinet knobs and pulls offers many great advantages including ease of use and introducing new and beautiful designs into your existing d├ęcor. Cup pulls are available in a wide variety of architectural styles (from Victorian to Post Modern) and can be easily incorporated into your home to enhance your older hardware.

Cup and bin pulls are a great addition to any piece of furniture or cabinet. The timeless designs and solid construction will add a timeless simplicity and beauty to any piece in your home. They are especially great to use on heavier drawers or cabinets where smaller knobs and pulls will not fit. Available in a wide variety of materials and designs, solid brass cup pulls can be a subtle way of updating your home and introducing new themes into your hardware. Most cup pulls are available in a variety of finishes as well including Polished Brass, Antique Brass, Oil Rubbed Bronze, Satin Nickel and Polished Chrome – giving you more options for coordinating your new hardware with existing knobs and pulls.

From traditional to ornate designs, cup pulls are still produced today. When deciding on a new cup pull for your kitchen, bathroom, bedroom, cabinets or furniture however it is important to remember a few simple steps. First, remember to measures carefully. Not all cup pulls are the same size and it is important to make sure your new cup holes will fit into pre-existing holes. Second, replace older knobs, lighting and doorknobs in your home as well. The use of solid brass cup pulls can be easily tied into your existing or new themes. Most home hardware (cabinet knobs, pulls, lighting, doorknob sets) is available in complementary designs. Make sure to look at home decorating magazines or consult with an interior design expert for more help.

How to Authenticate Victorian Case Furniture Antiques

As an auctioneer, I’m often asked how do you tell if something is old?

What does the term period as it pertains to antiques?

How do I spot a fake or a reproduction?

I hope this article will clear a few things up on those issues?

What is the single thing I can do or buy that will make me the most money as a part time antiquer?

The answer to that question is the very last sentence in this article.

Period antiques: There’s sometimes a lot of confusion about the term PERIOD when it comes to antiques and there shouldn’t be because the term has a very clear cut meaning. The term period simply means the original era an antique was originally made throughout.

Let’s take for example the Gothic Period which originated in the 12th Century and lasted throughout the 16th. So that span in History would be the actual Gothic Period.

But the Gothic Style, like so many styles throughout history was copied many times after, so a Gothic styled piece of furniture from the 1800s can be an antique, because the technical definition of an antique is anything over 100 years old, but that item cannot be a period piece. To sum up: All period items are antiques, but not all antiques are period items.

Antiques that are copies of early periods are often referred to as “revival” or in the style of etc.

The dollar value of a period piece will be many times more than it’s revivalist cousins.

Often people will see something on the antiques roadshow and mistakenly say something like, “I have one of those, I never realized it was worth $15,000 dollars!” They think that the antique Chippendale Style chest of drawers they have is the same as the actual Chippendale Period Piece. After all theirs is an antique, it’s been in the family for over 100 years.

It’s tough sometimes when I have to tell them that what they have is certainly worth having, but it’s really only worth about $300 dollars in a strong market. If the person I’m relaying this information to is a prospective client, I’d better use some tact if I want to get the estate consignment.

Bringing people around on the real value of what they have is a big part of an auctioneers job and often very difficult, especially when expectations are dashed and the value is much less than they originally thought. To be honest, some folks who just won’t hear you out will often call in 2 or 3 auctioneers before they believe it.

Of course, the other side of that coin is the estate executor that thinks they were assigned to liquidate a house full of junk and it’s my delight to inform them that they’re actually in charge of a small fortune in antiques.(But somehow these folks aren’t as hard to convince, and usually need only one auctioneer to tell them that. It’s a true pleasure if that auctioneer is me! OK, well let’s get this train back on track because this segment is supposed to deal with authenticating antiques. We went over the difference between a period antique and a antique, but in most cases what the average person wants to know, at least at first, is, is that the item in question really old or is it a reproduction, a fake, or a fantasy piece.

Was it made 100 years ago, or last week. While the answer to that may seem obvious, there are some pretty talented people out there churning out new antiques. Before we get into the detective work of finding out whether something is old or not. Let’s look at the categories above because they are not all equal, here are the differences.

A fake: A fake can fall into a few different categories, it can be a legitimate reproduction, that someone has taken the identifying marks off of to try to pass it off as old. It can be something that was manufactured with the intent of deceiving the buyer. It can be an old item that has been altered.

A reproduction: A reproduction is something that was made to look as close to the original as possible, but is signed or otherwise marked to let the buyer know that it is not old. It’s not very high on the scale of collectiblity, but its several notches above a fake, and when the original isn’t obtainable, it’s a nice alternative.

A Fantasy Piece: A fantasy piece is something that is made to look old, but that actual item never really existed. Let’s say for example a Coca-Cola tray of which never saw production originally, but was made in the 1980s with the surface adorning a flapper models. Coke has many legitimate licensed fantasy items and they’re marked with the date of manufacture.

All of 3 of these exist in almost every category of antiques, from furniture to jewelry, which brings us to the feature of this show… authenticating what you have. Authenticating an antique is very much detective work. When you have the piece in front of you there is just no better way to find out whether or not it’s old than to use the simple but powerful skills of observation.

Let’s begin with case furniture. That being any type of furniture that has a case or a box type main structure. Dressers, blanket chests, bookcases, chests of drawers, Secretaries, writing desks.

One of the most revealing elements of these pieces is the drawer. Pull it out carefully and inspect it all the way around. Are the runners on the bottom well worn? Have they been replaced or repaired? This would obviously indicate wear which usually indicates age.

Now look at the inside edges of the drawers are there several small overlaps of stain or finish indicating that it’s been refinished a few times, or does it appear that there is no overlap of stain or an extremely faint amount, thus most likely indicating the item is in it’s original finish.(Big points for this, if it is an antique item.)

Are there extra holes next to the posts for the handle pulls. If so the handles were replaced and are not original. Of course even if there are not a pair of offset holes, the handles could have been replaced with a pair that had the exact post set measurements as the original handles. The other way to tell if handles have been replaced is to look close at the finish around the handles, is there a faint outline in the finish or sub-finish from an old handle. (Again, big points for original handles and original hardware.)

Now let’s have a look at the corners of the drawers, are they dovetailed? If so, this is quality construction. Are the dovetails hand-cut or machined? Hand cut would probably indicate an antique, the piece could just be hand crafted, but not very likely. More about that later. For this section, we’ll assume that hand-cut dovetails indicate antiques for the sake of moving along. Hand cut dovetails usually have a very narrow tail offset by a very fat one. Machined dovetails are very uniform in construction. Most of the machined dovetails came out after the 1850s, so it is still possible for an antique to have these and many do. In fact many pieces of antique furniture were manufactured in whole or in part, in factories throughout the world.

Are the corners scalloped with dowels inside a half-circle pattern down the side in a mortise & tenon fashion. This system is usually only seen on furniture made from about 1850 to 1880 and usually country pine more than anything else.

Nailed together joints are usually on home made type furniture, or unimportant manufactured furniture. It can still be well constructed, especially when compared to today’s pseudo wood anti-products, but it will never achieve the collectiblility of it’s well crafted cousins.

You’ll see a slot method on occasion also, this is a step above nailed joints, but below any dovetailing.

An important date for would be antiquers to remember is 1830. It’s the date that many historians recognize as the breakout of the Industrial Revolution. The only true statement we can make from this is that most of what came before it was hand made, and much of what came after was not. It’s not an absolute, but it’s the best we can do.

Antique detecting is like crime detecting in that it’s as much an art as it is a science.

So swell up and pat yourself on the other side all of you antiquers, not only are you kings & queens of the recyclable kingdom, but your an artists and scientists to boot.

Back to that drawer. So you’ve looked at the dovetails in the front of the drawer, but if it’s dovetailed or mortised all the way around it’s of better quality than those who use the method only on the front and leave the back joints to a slot method.

In a similar way, the feet or legs of a piece of case furniture will tell you the same thing. See, it was the common method to put the fancy ball and claw type feet or other fancy feet on the front, and straight feet on the back. The reason being that it often took a craftsman almost as much time to carve a great pair of feet as it would to construct the entire case, so the shortcut was to put straight legs on the back. Therefore the higher quality pieces would have the carved feet all the way around. If you’ve ever wondered why an auctioneer used the phrase ball & claw all the way around, that’s the reason.

Now the feet, if the legs or feet are post types, they should be slightly more narrow on the very bottom due to shrinkage through the ages. There should be wear, especially on chairs, which are moved around more than other pieces of furniture. But we were talking about case furniture weren’t we.

Look for signatures everywhere on the item. EVERYWHERE. With glass and china or other antiques, if there’s a makers mark, it’s common for the makers mark to be on the bottom, with case furniture, it could be on the bottom, the back or anywhere on the inside. I’ve found many pieces that were signed on the insides of drawers, bottoms of drawers, signed in pencil, carved,stamped and labeled. And unfortunately many pieces that are not signed.